How to use plugs from Japan in Montserrat (Leeward Islands)
Plugs, sockets, adapters and other information needed for travelling from Japan to Montserrat (Leeward Islands) in this page. If you want a report for other countries, re-start the wizard to find to electric adapters for your trip here.
Quick Chart at-a-glance
| Japan | Montserrat (Leeward Islands) | ||
|---|---|---|---|
| Voltage: | 100V. | 230V. |
|
| Plugs Type: | A, B. | A, B. |
|
| Hertz: | 50Hz., 60Hz. | 60Hz. |
If you are electrical savvy, perhaps the previous chart is all you need. If this is not the case, you can continue reading and discover what the chart is saying!
Plugs and Sockets at each country
In Japan the following plugs are used: (includes Tokyo, Kyoto, Osaka, Fukuoka, Nagoya, Nagasaki, Sapporo, Southern Okinawa-hontō, Motobu Peninsula, Northern Okinawa-hontō, Naha.)
|
|
| Plug Type A | Plug Type B |
|
|
| Outlet Type A | Outlet Type B |
Considerations for Japan
Users living in Japan have commented to us the outlets type "B" are not common, therefore plugs type "B" might not be easy to plug in Japan.
... and in Montserrat (Leeward Islands) you will use: (includes Plymouth.)
|
|
|
| Plug Type A | Plug Type B |
|
|
|
| Outlet Type A | Outlet Type B |
Voltage
Take care: Montserrat (Leeward Islands) uses higher voltage than Japan
Your electric devices from Japan will be expecting 100 Volts, but Montserrat (Leeward Islands) grid is of 230 Volts, this is a substantial difference that requires you to take some extra steps in preparation to your trip:
On the positive side, nowadays many devices will switch automatically to the network voltage and they will work just fine, i.e. mobile phone chargers are typically multi-voltage (but please, do actually check your own). It is important that you pay attention to your device's voltage. Connecting electronics to the wrong voltage, in the luckiest of the cases, the device will break or stop working temporarily; but please don't take this lightly, in the worst of the cases electrocution and fire hazards are a real possibility.
High-power devices don't usually handle different voltages due to the high-currents involved i.e. anything that its main purpose involves generating heat (or cold) like hair driers, baby bottle warmers, kettles, etc. On the contrary, modern low-power devices are likely to auto-detect and auto-adapt to different voltages i.e. usb chargers, laptop chargers, etc.
You will need a step down voltage converter a device that can be plugged to 230 volts and it provides an outlet with 100 volts for your Japan' device. You will need to pay attention to the maximum power output of the converter and the maximum power consumption of the device.
Plugs Type
Same connectors
Ideal situation, all the connectors used in Japan are also used in Montserrat (Leeward Islands). You will not need any adapter (but please check voltages and the other sections of this report). Congratulations!!!!
Adapters
Lists of adapters you can use in your travel:
Adapter: generic
|
|
| Front | Back |
This adapter allows you to use plugs type: A, B, C, D, E, F, G, H, I, J, K, L, M, N into outlets type: B.
Adapters you can buy
You can buy the following multi-purpose adapters from Amazon. Please also take a look at the recommended gadgets for your trip.
Hertz
No equal Hertz
This is not a big issue. Unless you are using an electric alarm clock or some motors when speed is an issue. Explanation: Some alarm clocks uses the frequency of electricity network to measure time. So, time shifts could be experimented. Almost every home electronic device works perfectly with different Hertz.
Finally, by the way ...
We are revamping the blog! Visit our new blog here.
↬ a link from your website helps too.